synth_machxo2 - synthesis for MachXO2 FPGAs. This work is experimental.

yosys> help synth_machxo2

synth_machxo2 [options]

This command runs synthesis for MachXO2 FPGAs.

-top <module>

use the specified module as top module

-blif <file>

write the design to the specified BLIF file. writing of an output file
is omitted if this parameter is not specified.

-edif <file>

write the design to the specified EDIF file. writing of an output file
is omitted if this parameter is not specified.

-json <file>

write the design to the specified JSON file. writing of an output file
is omitted if this parameter is not specified.

-run <from_label>:<to_label>

only run the commands between the labels (see below). an empty
from label is synonymous to 'begin', and empty to label is
synonymous to the end of the command list.

-nobram

do not use block RAM cells in output netlist

-nolutram

do not use LUT RAM cells in output netlist

-noflatten

do not flatten design before synthesis

-noiopad

do not insert IO buffers

-vpr

generate an output netlist (and BLIF file) suitable for VPR
(this feature is experimental and incomplete)

The following commands are executed by this synthesis command:

    begin:
        read_verilog -lib -icells +/machxo2/cells_sim.v
        hierarchy -check -top <top>

    flatten:    (unless -noflatten)
        proc
        flatten
        tribuf -logic
        deminout

    coarse:
        synth -run coarse

    map_ram:
        memory_libmap -lib +/machxo2/lutrams.txt -lib +/machxo2/brams.txt [-no-auto-block] [-no-auto-distributed]    (-no-auto-block if -nobram, -no-auto-distributed if -nolutram)
        techmap -map +/machxo2/lutrams_map.v -map +/machxo2/brams_map.v

    fine:
        memory_map
        opt -full
        techmap -map +/techmap.v
        opt -fast

    map_ios:    (unless -noiopad)
        iopadmap -bits -outpad $__FACADE_OUTPAD I:O -inpad $__FACADE_INPAD O:I -toutpad $__FACADE_TOUTPAD ~T:I:O -tinoutpad $__FACADE_TINOUTPAD ~T:O:I:B A:top
        attrmvcp -attr src -attr LOC t:$__FACADE_OUTPAD %x:+[O] t:$__FACADE_TOUTPAD %x:+[O] t:$__FACADE_TINOUTPAD %x:+[B]
        attrmvcp -attr src -attr LOC -driven t:$__FACADE_INPAD %x:+[I]

    map_ffs:
        dfflegalize -cell $_DFF_P_ 0

    map_luts:
        abc -lut 4 -dress
        clean

    map_cells:
        techmap -map +/machxo2/cells_map.v
        clean

    check:
        hierarchy -check
        stat
        blackbox =A:whitebox

    blif:
        opt_clean -purge                                     (vpr mode)
        write_blif -attr -cname -conn -param <file-name>     (vpr mode)
        write_blif -gates -attr -param <file-name>           (non-vpr mode)

    edif:
        write_edif <file-name>

    json:
        write_json <file-name>